Vanguard BA-185 Binocular Tripod Adapter (Black)

Vanguard BA-185 Binocular Tripod Adapter (Black)

The BA-185 Binocular Tripod Adapter fit to most tripods and certainly any Vanguard tripod. It has a drilled hole to accept the location pin on the tripod head which stops the adapter from swivelling during use. The thread is turned by an extending finger knob which has been designed for maximum efficiency and comfort; it extends allowing the adapter to be used where other adapters would be impossible to tighten. The standard thread pulls the binocular on to a rubber seating pad which protects the instrument while at the same time holding it firmly in place. 

• Screws on to binocular between objective lenses (binocular must have a 1/4"-20 threaded socket)
• Attaches to any standard tripod, monopod, chest support, etc. (support mechanism must have a 1/4"-20 threaded screw)
• Intended for roof prism binoculars (some 50mm+ roof prism binoculars may have an increased minimum interpupillary distance)

The BA-185 Binocular Tripod Adapter steadies a binocular for clear, relaxed, hands-free viewing. It works with any roof prism binocular that has a standard 1/4-20 thread tripod socket, and on most models its thin bridge will still allow you to set your bincular to the minimum interpupillary distance adjustment.