CameraSky

0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Warranty Terms and Conditions

View our Warranty Returns Process →

Standard and Extended Warranty Terms and Conditions

Please contact CameraSky Australia Support via the Help Center for all warranty and product support requests.

These terms and conditions apply to Standard and Extended Warranties of products purchased from www.camerasky.com.au.

You may be asked to return the relevant Product to a specified address in Australia given by CameraSky Australia customer service representative. Some warranty returns will require your product to be returned to our repair center in Hong Kong.

These Terms and Conditions constitute a contract between the customer (you) and CameraSky.

These terms and conditions apply to Standard and Extended Warranties of Products from www.camerasky.com.au

Products You Order are offered and supplied by CameraSky. Please read the Website Terms and Conditions for further information.

CameraSky supplies and supports all warranties relating to Products which are noted as being offered and supplied by CameraSky.

We recommend that you keep your original product packaging if possible. In the unlikely event that you require a warranty repair and you do not have the original packaging, you will bear the responsibility for safely packaging your Product for transport and CameraSky Australia accepts no liability for any damage that may occur in transit.

The warranties and product support set out in these Terms and Conditions are provided by CameraSky irrespective of:

  1. the identity of the manufacturer of the Product;
  2. whether or not the manufacturer has provided its own warranties or product support in relation to the Product.

For the avoidance of doubt:

  1. We make no representations or warranty in relation to the existence, non-existence, validity, availability, terms or conditions of any other warranties or product support that may or may not be offered or provided by the manufacturer of the Product; and
  2. Our goods come with guarantees that cannot be excluded under the Australia Consumer Law. The warranties and product support that we offer and provide pursuant to our Terms and Conditions are in addition to the consumer warranties and guarantees under the Australia Consumer Law.

Warranty Terms

1

Subject to the terms and conditions set out below, CameraSky agrees to repair or replace the Product which it supplied to you at its own cost, in circumstances where the Product does not perform in accordance with CameraSky Australia’s specifications during:

  1. the Standard Warranty period of 12 months; or
  2. the applicable Extended Warranty period, commencing on the date of delivery of the Product. Where there is no proof of delivery, this date will be assumed to be 3 business days from the date of dispatch of the Product.

2

The benefits provided to you by this contractual product warranty are in addition to other rights and remedies available to you under the law.

3

Proof of purchase (invoice or paid Order confirmation) must be provided when requesting service under the Standard or Extended Warranties.

4

CameraSky Australia requires any customer requesting service under the Standard or Extended Warranties to comply with directions from CameraSky Australia staff or service agent acting on behalf of CameraSky Australia in relation to troubleshooting any issue and facilitating any repair or replacement under these Warranty Terms and Conditions.

5

Where Products are already faulty or damaged upon delivery, photographic evidence of the damage must be submitted to CameraSky Australia Support within 7 days via the Help Center before the Product will be repaired or replaced in accordance with these terms.

6

CameraSky Australia reserves the right to replace the Product or relevant part with the same or equivalent Product or part, rather than repair it. Where a replacement is provided, CameraSky Australia reserves the right to replace the Product or relevant part with the same or equivalent Product or part, rather than repair it. Where a replacement is provided, CameraSky Australia will determine, in its discretion, the closest Product within the then current range of Products offered by CameraSky Australia with which to replace the faulty or damaged Product. The replacement Product may differ with the replaced Product in size and specifications, at the reasonable election of CameraSky Australia . CameraSky Australia may replace parts with refurbished parts. Replacement of the Product or a part under the Standard Warranty or Extended warranty does not extend or restart the Standard Warranty or Extended Warranty period.

6.1

If CameraSky Australia is unable to repair or replace the Product, the customer will be provided with credit for CameraSky Australia’s store or may be refunded the price of the Product (at CameraSky Australia’s election). This credit or refund will be for the amount of the purchase price of the Product excluding the associated Delivery Cost.

7

In the event that a replacement, refund, or store credit is provided as per section 6, the faulty item will become the property of CameraSky Australia.

8

Where CameraSky Australia authorises warranty service of a Product, CameraSky Australia Support team will provide a designated return address for the Customer to post to at the Customer’s cost. The Customer may take the Product to the appropriate repair centre for service if CameraSky Australia specifically authorises the Customer in writing to do so. Where the customer is located outside Australia , CameraSky Australia may require that the Product be sent to Hong Kong or Australia , as directed by CameraSky Australia.

The Customer is responsible for inspecting all goods received from CameraSky Australia upon arrival. In instances where goods have been damaged in transit, the Customer must report this to CameraSky Australia within 3 days of receipt of the product. Failure to report physical damage on arrival within 3 days of receipt may result in denial of warranty for physical damage. in which case CameraSky Australia will refund the Customer the cost of the postage on provision of a scanned copy of the postage receipt.

9

Standard and Extended Warranties of products purchased from www.camerasky.com.au do not apply:

  1. To consumable parts, such as batteries or protective coatings that are designed to diminish over time, unless failure has occurred due to a defect in materials or workmanship;
  2. to cosmetic damage, to boxes, packaging or exterior surfaces (including during transit);
  3. to damage caused by use with another product;
  4. to damage caused by accident, abuse, misuse, liquid contact, fire, earthquake or other external cause;
  5. to damage caused by operating the Product outside any guidelines published for use;
  6. to damage caused by service (including upgrades and expansions) performed by anyone who is not a representative of CameraSky Australia;
  7. to a Product that has been modified to alter functionality or capability without the written permission of CameraSky Australia, including but not limited to installation of custom firmware or other software;
  8. to defects caused by normal wear and tear or otherwise due to the normal ageing of the Product,
  9. if any serial number has been removed or defaced from the Product,
  10. if the product is stolen or CameraSky Australia reasonably believes that the product is stolen based on information provided by law enforcement authorities, or
  11. Where proof of purchase (invoice or paid Order confirmation) cannot be provided.

10

CameraSky Australia reserves the right to determine which authorised repair centre (including CameraSky Australia’s internal repair facility) is the appropriate service location in any particular circumstance.

11

The Product will be at the Customer’s risk while in transit to and from the CameraSky Australia Authorised Repair Centre.

12

CameraSky Australia may seek reimbursement of any costs incurred by Us where the Product is found to be in good working order, or when it has been determined that the Standard Warranty and Extended Warranty do not apply as per section 17.

13

CameraSky Australia reserves reasonable discretion to determine whether any Product is or is not performing in accordance with the CameraSky Australia’s specifications, subject to applicable law.

14

The Standard and Extended Warranties are transferrable to a new owner of a Product originally purchased from www.camerasky.com.au, provided CameraSky Australia is informed by contacting CameraSky Australia Sales via the Help Center within 7 days of the date of transfer.

15

Extended Warranties are available for purchase for some Products, as listed on the Website. These Extended Warranties may be purchased up to 14 days after delivery of your Products.

16

Where an Extended Warranty is purchased, it will replace the 12-month Standard Warranty period with the extended warranty period (for example, either 3 or 5 years).

17

CameraSky Australia is entitled to terminate the Extended Warranty by e-mail notice to the Customer in the event that, in CameraSky Australia’s opinion, the Product is used contrary to its specifications, in which case CameraSky Australia will pay a pro-rata refund for the unexpired period of the Extended Warranty less administration expenses.

18

To the full extent permitted by law, the Standard Warranty and Extended Warranty will not apply in respect of a Product:

    1. If the Product has not been installed, operated, maintained or used in accordance with the manufacturer’s instructions or specifications provided with the Product;
    2. If the factory-applied serial number has been altered or removed from the Product;
    3. Which has suffered damage, malfunction or failure resulting from alterations, any alterations (hardware or software), accident, misuse, abuse, fire, liquid spillage, mis-adjustment of customer controls, use on an incorrect voltage, power surges and dips, thunderstorm activity, force majeure, voltage supply problems, tampering or unauthorised repairs by any persons, use of defective or incompatible accessories, the operation of a computer virus of any kind, exposure to abnormally corrosive conditions or entry by any insect, vermin or foreign object in the Product;
    4. To damage arising during transportation, installation or while moving the Product, or to any transportation costs of the Product or any parts thereof to and from the Customer, unless otherwise specified in these Warranty Terms and Conditions;
    5. To any third-party software or hardware not contained in the Product as originally configured by the manufacturer;
    6. To any incidence of defective pixels (i.e. dead or stuck pixels) that arise for LED TVs, Monitors and Digital Photo Frames, except as determined by CameraSky Australia to denote an LED or LCD panel fault (and except as covered by the Website Terms and Conditions).
    7. To any failure, to the extent that the failure is not a failure of the Product to perform in accordance with its specifications;
    8. To replacement or repair of any consumables (including batteries, projector lamps and cables), or lost parts or accessories;
    9. To service and support of any software operating system or application installed on any Product, except to assist in restoring the Product to its factory default settings; or;
    10. To service of any product whilst it is outside Australia.

19

To the full extent permitted by law:

  1. CameraSky Australia will not be liable for any loss, damage or alterations to third party hardware, software, programs, data and/or information stored on any media or any part of the Product, no matter how occurring; or for any loss or damage arising from loss of use, loss of profits or revenue, or for any resulting indirect or consequential loss or damage.
  2. CameraSky Australia’s aggregate liability in respect of all claims under the Standard Warranty and Extended Warranty shall not exceed the original purchase price of the Product or, at CameraSky Australia’s option, replacement of the Product with a like or similar Product.
  3. CameraSky Australia excludes all other warranties, conditions, terms, representations and undertakings whether express or implied.

20

Insofar as they apply to warranties relating to the Products supplied by CameraSky, these Standard and Extended Warranty Terms and Conditions are governed by and must be construed according to the law of Hong Kong and the parties submit to the jurisdiction of the courts of Hong Kong.

21

Our goods come with guarantees that cannot be excluded under the Hong Kong Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if goods fail to be of acceptable quality and the failure does not amount to a major failure.

CameraSky Australia can be contacted by various method via the Contact Us page.

CameraSky Australia ‘s head office is located at 9 A &B, Ka Ming Court, 688 Castle Peak Road, Kowloon, Hong Kong.